Using Vintage Kitchen Tools

[Nyboy]

http://www.ebay.com/itm/Antique-Cast-Iron-FRUIT-PRESS-/171871373483?hash=item28045508ab What about this ? would you use, says cast iron ( I not buying just example of rust)

 

[Nyboy]

http://www.ebay.com/itm/Antique-gra...pa-/161755928838?hash=item25a9679906#shpCntId This is a great deal but they willn't ship you have to pick up

 

[valley ranch]

I have a grape press a good bit larger than that. My father made a smaller basket, for use with smaller batches. Always great to have a press.

The price is right. I'd buy that one in a hot minute if I didn't have one.
--------------------------------------------------------------------------------------------------------------------------
Blueing

Bluing is a passivation process in which steel is partially protected against rust, and is named after the blue-black appearance of the resulting protective finish. True gun bluing is an electrochemical conversion coating resulting from an oxidizing chemical reaction with iron on the surface selectively forming magnetite (Fe3O4), the black oxide of iron. Black oxide provides minimal protection against corrosion, unless also treated with a water-displacing oil to reduce wetting and galvanic action. A distinction can be made between traditional bluing and some other more modern black oxide coatings, although bluing is a subset of black oxide coatings.

In comparison, rust, the red oxide of iron (Fe2O3), undergoes an extremely large volume change upon hydration; as a result, the oxide easily flakes off causing the typical reddish rusting away of iron. "Cold", "Hot", "Rust Blue" and "Fume Blue" are oxidizing processes simply referred to as

bluing.

"Cold" bluing is generally a selenium dioxide based compound that colours steel black, or more often a very dark grey. It is a difficult product to apply evenly, offers minimal protection and is generally best used for small fast repair jobs and touch-ups.

The "Hot" process is an alkali salt solution, referred to as "Traditional Caustic Black", that is typically done at an elevated temperature, 135 to 155 °C (275 to 311 °F). This method was adopted by larger firearm companies for large scale, more economical bluing. It does provide good rust resistance which is improved with the use of oil.

"Rust Bluing" and "Fume Bluing" provide the best rust and corrosion resistance as the process continually converts any metal that is capable of rusting into magnetite (Fe3O4). Treating with an oiled coating enhances the protection offered by the bluing. This process is also the only process safely used to re-blue vintage shotguns. Many double barrelled shotguns are silver brazed together and many of the parts are attached by that method also. The higher temperatures of the other processes as well as their caustic nature can weaken the brazed joints and make the gun hazardous to use.[citation needed]

Bluing can also be done in a furnace, for example for a sword or other item traditionally made by a blacksmith or specialist such as a weaponsmith. Blacksmith products to this day may occasionally be found made from blued steel by traditional craftsmen in cultures and segments of society who use that technology either by necessity or choice.[1]

taken from wikipedia

I think for use with food I'd blue the outside, I might season the inside.

 

[Nyboy]

Valley thanks for the lesson .

 

[valley ranch]

Nyboy, The press I'm talking about is the wooden press.

All the wood on that press is oak any piece you're unhappy with you can replace.

Doesn't look like they been using it. They might get off of it a pinch cheeper, if not it worth the $70.

How far are you from there, don't know where Lagrange is. On my way to Canada, with a friend, from Albany in a snow storm, lost it at Buffalo and drove into Pennsylvania.

 

[Nyboy]

Valley ranch can't touch wooden ones for under $200. Most in good shape go between $400 and $500

 

[ninnymary]

Road trip? It may be worth it. Take a friend along and have some fun!

Mary

 

[valley ranch]

Nyboy, You posted one at $70. Is that one gone?

 

[Nyboy]

No but in another state. Mary summer my busiest time of year, no way could take trip.

 

[valley ranch]

I wouldn't buy an arbor press sight unseen, you have to be there. I've seen broken uprights.
If you're too busy to go in person I'd give it a pass.


This got me out of bed. Good night.

Richard